How To Start A Yard Machine Snow Blower

Yard Machines 26 in. 208cc 2Stage Electric Start Gas Snow Blower from www.homedepot.com

If you live in an area where snow is a common occurrence during winter, then owning a snow blower is a must. A yard machine snow blower is a great investment if you want to clear snow from your driveway or sidewalk easily and efficiently. However, starting a snow blower can be a bit tricky, especially if you're using it for the first time. In this article, we'll show you how to start a yard machine snow blower in a few easy steps.

Step 1: Prepare Your Snow Blower

Before starting your yard machine snow blower, you need to make sure that it's properly prepared for use. First, check the oil level in the engine. If it's low, add some oil to bring it to the recommended level. Next, check the fuel level and make sure that there's enough gas in the tank. If the fuel is old, drain it and replace it with fresh gas. Finally, check the spark plug and make sure that it's clean and properly gapped.

Step 2: Prime the Engine

To prime the engine, locate the primer bulb on your snow blower. Press it several times until you see gas flowing into the bulb. This will help the engine start easily. If your snow blower has a choke, set it to the "on" position.

Step 3: Adjust the Throttle

Most yard machine snow blowers have a throttle control that allows you to adjust the engine speed. Set the throttle to the "fast" position to start the engine. Once the engine is running smoothly, you can adjust the throttle to a lower speed to reduce noise and save fuel.

Step 4: Pull the Starter Cord

Now it's time to start the engine. Stand behind the snow blower and firmly grasp the starter cord. Give it a quick, strong pull to turn the engine over. If the engine doesn't start on the first pull, wait a few seconds and try again. Don't pull the cord too hard or too fast, as this can damage the engine or the starter mechanism.

Step 5: Clear the Snow

Once the engine is running, you're ready to clear the snow. Engage the auger and drive controls, and slowly move the snow blower forward. Keep both hands on the controls at all times, and be aware of any obstacles or hazards in your path. When you're done clearing the snow, disengage the auger and drive controls, and turn off the engine. In conclusion, starting a yard machine snow blower is not as difficult as it may seem. With the right preparation and a few simple steps, you can have your snow blower up and running in no time. Just remember to follow these steps carefully, and always use your snow blower safely and responsibly. Happy snow blowing!