Removing Auger From Ariens Snowblower: A Comprehensive Guide

Ariens Snowblower Auger Worm Gear ST824 924050 52402600 524026 924082 from www.walmart.com

Snowblowers are essential equipment during the winter season, especially in areas with heavy snowfalls. However, like all machines, they require maintenance from time to time. One of the most common maintenance tasks is removing the auger from the snowblower. This task may seem daunting, but it's relatively simple with the right tools and knowledge. In this article, we'll provide a step-by-step guide on how to remove the auger from an Ariens snowblower.

Step 1: Preparation

Before starting the task, make sure that you have all the necessary tools and equipment. You'll need a wrench, socket set, pliers, and a screwdriver. It's also advisable to wear protective gear such as gloves and safety glasses to prevent any accidents.

Step 2: Turn off the Snowblower

Safety should always come first when working with any machinery. Turn off the snowblower and unplug it from the power source. This ensures that the machine won't accidentally turn on while you're working on it.

Step 3: Remove the Bolts

The auger is attached to the snowblower by bolts. Use a socket set or a wrench to remove the bolts holding the auger in place. Make sure to keep the bolts in a safe place so you won't lose them.

Step 4: Remove the Drive Belt Cover

After removing the bolts, you'll need to remove the drive belt cover. Use a screwdriver or pliers to remove the screws or bolts holding the cover in place. Once the cover is removed, set it aside.

Step 5: Remove the Drive Belt

The drive belt is what connects the engine to the auger. To remove the auger, you'll need to remove the drive belt first. Loosen the tension of the drive belt by adjusting the tensioner pulley. Once the tension is loose, remove the drive belt from the pulleys.

Step 6: Remove the Shear Pins

The shear pins are small bolts that connect the auger to the driveshaft. These pins are designed to break if the auger encounters a hard object, preventing damage to the machine. Use pliers to remove the shear pins from the auger.

Step 7: Remove the Auger

With the bolts, drive belt, and shear pins removed, you can now remove the auger from the snowblower. Carefully lift the auger off the driveshaft and set it aside.

Step 8: Inspection

Inspect the auger and the driveshaft for any signs of damage or wear. If you notice any damage, it's best to replace the parts instead of trying to repair them.

Step 9: Reassemble

Once you've inspected the parts and made any necessary repairs, it's time to reassemble the machine. Follow the steps in reverse order, starting with placing the auger back on the driveshaft. Reinstall the shear pins, drive belt, drive belt cover, and bolts.

Step 10: Test the Machine

After reassembling the machine, test it to ensure it's working correctly. Turn the snowblower on and check the auger's rotation to ensure it's functioning correctly. If everything works as it should, you're good to go! In conclusion, removing the auger from an Ariens snowblower may seem intimidating, but it's a straightforward process. Follow the steps outlined in this article, and you'll be able to remove the auger and perform any necessary maintenance with ease. Remember to prioritize safety and wear protective gear while working on the machine. By taking care of your snowblower, you'll ensure that it lasts for many winters to come.