Honda Crv Hood Release 2015: Tips And Review

How To Pop The Hood On A Honda CRV (20122016)Hood Release Location from www.youtube.com

If you own a Honda CRV 2015 model, you may have encountered difficulty in opening the hood. The hood release mechanism may malfunction or get stuck, leaving you clueless on how to access the engine. In this article, we will provide you with some tips and review on how to troubleshoot the Honda CRV hood release mechanism.

Description of Honda CRV Hood Release Mechanism

The Honda CRV hood release mechanism is located inside the cabin, under the dashboard on the driver’s side. It consists of a cable and a release lever. When you pull the release lever, the cable pulls the latch on the hood, allowing you to open it. However, over time, the cable may become loose, rusted, or broken, making it difficult to release the hood.

Troubleshooting Tips for Honda CRV Hood Release Mechanism

If you experience difficulty in releasing the hood of your Honda CRV 2015 model, here are some troubleshooting tips that you can follow:

1. Check the cable connection.

The first thing that you need to do is to check the cable connection. Open the driver’s side door and look under the dashboard. You should be able to see the cable connected to the release lever. Make sure that the cable is properly connected and not disconnected or loose.

2. Lubricate the cable.

If the cable is connected properly but still not releasing the hood, it may be due to rust or corrosion. Apply a lubricant such as WD-40 or silicone spray to the cable to help loosen it up. Spray the lubricant on both ends of the cable and wait for a few minutes before attempting to release the hood again.

3. Pull the cable manually.

If the cable is completely broken or disconnected, you can still open the hood manually. Locate the latch on the hood and use pliers or a wrench to pull it. You may need to apply some force to open the hood.

Conclusion

In conclusion, opening the hood of your Honda CRV 2015 model can be a daunting task, especially if the hood release mechanism is not functioning properly. However, by following the troubleshooting tips provided in this article, you can easily troubleshoot the mechanism and open the hood without any difficulty. Remember to always check the cable connection, lubricate the cable, and pull the cable manually if necessary.