Honda Gx390 Oil Change: Tips And Tricks In 2023


HONDA GX390 18AMP
HONDA GX390 18AMP from www.watertruckpartsonline.com.au

As a responsible owner of a Honda GX390 engine, you should know the importance of regular oil changes to keep your engine running smoothly. The oil is the lifeblood of your engine, and without it, the engine components will wear out quickly and cause irreversible damage. In this article, we will discuss everything you need to know about changing the oil in your Honda GX390 engine in 2023.

When Should You Change the Oil?

The first thing you need to know is the recommended oil change interval for your Honda GX390 engine. Honda recommends changing the oil every 50 hours of operation or once a year, whichever comes first. However, if you operate your engine in harsh conditions, such as dusty or humid environments, you may need to change the oil more frequently. It's also a good idea to change the oil if you notice any signs of contamination, such as a milky appearance or a burnt smell.

How to Check the Oil Level?

Before you change the oil, you need to check the oil level to determine how much oil you need to replace. To check the oil level, follow these steps:

  1. Turn off the engine and let it cool down for a few minutes.
  2. Remove the oil filler cap/dipstick and wipe it clean with a rag.
  3. Insert the dipstick back into the oil filler hole and remove it again.
  4. Check the oil level on the dipstick. The oil level should be between the upper and lower marks on the dipstick. If the oil level is below the lower mark, you need to add more oil.

How to Change the Oil?

Now that you know when to change the oil and how to check the oil level, it's time to learn how to change the oil in your Honda GX390 engine. Here are the steps:

Step 1: Drain the Old Oil

First, you need to drain the old oil from the engine. Here's how:

  1. Turn off the engine and let it cool down for a few minutes.
  2. Place a drain pan under the oil drain plug to catch the old oil.
  3. Remove the drain plug and let the oil drain into the pan.
  4. Once all the oil has drained out, replace the drain plug and tighten it securely.

Step 2: Replace the Oil Filter

Next, you need to replace the oil filter. Here's how:

  1. Locate the oil filter on your engine. It's usually located near the oil drain plug.
  2. Use an oil filter wrench to remove the old oil filter.
  3. Apply a small amount of new oil to the gasket of the new oil filter.
  4. Screw the new oil filter onto the engine by hand until it's snug. Then, tighten it another half turn.

Step 3: Refill with New Oil

Finally, you need to refill the engine with new oil. Here's how:

  1. Remove the oil filler cap/dipstick.
  2. Pour the recommended amount of new oil into the engine through the oil filler hole.
  3. Check the oil level with the dipstick to ensure it's between the upper and lower marks.
  4. Replace the oil filler cap/dipstick and start the engine.
  5. Let the engine run for a few minutes to circulate the new oil.
  6. Check the oil level again and add more oil if necessary.

Tips and Tricks

Here are some tips and tricks to help you change the oil in your Honda GX390 engine:

  1. Always use the recommended type and viscosity of oil for your engine.
  2. Warm up the engine for a few minutes before changing the oil. Warm oil flows more easily and removes more contaminants.
  3. Always dispose of the old oil and filter properly. Many auto parts stores and service centers offer oil recycling services.
  4. Use a funnel to pour the oil into the engine to avoid spills and overfilling.
  5. Check the oil level regularly and top it up as necessary.

Changing the oil in your Honda GX390 engine is a simple task that you can do yourself with a few basic tools and some know-how. By following the steps and tips outlined in this article, you can ensure your engine runs smoothly and lasts for years to come.


Komentar

Posting Komentar